BMW Recall: 720,796 Cars Must Park Outside Over Fire Risk
A degraded water pump connector can let moisture in and short circuit, so BMW and NHTSA are telling 720,796 owners to park outside until a fix that does not exist yet is ready.
BMW is recalling 720,796 vehicles in the United States and telling owners to park outside and away from structures until the cars are repaired. The problem is the water pump's electrical connector: over time its material degrades, moisture can enter the pump, and the result can be a short circuit, a thermal event and, in rare cases, a fire. There is no fix yet. The remedy is still under development.
The campaign is NHTSA 26V733, filed by BMW on Nov 4, 2026. It replaces a 2024 recall, 24V608, that covered the same vehicles for the same water pump. Every car in the new recall was already recalled once for this component, and cars that were repaired under the 2024 campaign need the new remedy as well. NHTSA underlined the urgency on Nov 13, 2026 with a consumer alert titled "Urgent Park Outside Recall Issued for Nearly 721K BMW Vehicles."
Quick Facts: BMW Park Outside Recall
| Detail | Information |
|---|---|
| NHTSA campaign | 26V733 |
| Affected vehicles | 720,796 vehicles in the US |
| Models | 2012-2016 3 Series and 5 Series, 2012-2015 X1, 2013-2017 X3, 2015-2018 X4, 2016-2018 X5 xDrive40e, plus 2 Series, 4 Series and Z4 models |
| Defect | Water pump electrical connector degrades, moisture enters the pump, short circuit possible |
| Owner advisory | Park outside and away from structures until the remedy is completed |
| The fix | Not ready yet, remedy under development, free once available |
| Owner letters | Planned for Dec 25, 2026 |
| VIN check | Searchable on NHTSA.gov from Dec 25, 2026 |
Which BMWs are included
The recall covers 14 model groups, all of them four-cylinder 28i variants, plus the X5 xDrive40e plug-in hybrid. The counts below are from BMW's filing and add up to the 720,796 total:
- 3 Series sedan (328i, 328xi), 2012-2016: 236,702
- X3 (sDrive28i, xDrive28i), 2013-2017: 163,728
- 5 Series (528i, 528i xDrive), 2012-2016: 110,102
- X1 (sDrive28i, xDrive28i), 2012-2015: 62,954
- 4 Series Coupe (428i, 428i xDrive), 2014-2016: 29,693
- 4 Series Gran Coupe (428i, 428i xDrive), 2015-2016: 23,790
- 4 Series Convertible (428i, 428i xDrive), 2014-2016: 20,082
- X5 xDrive40e, 2016-2018: 14,808
- X4 (xDrive28i), 2015-2018: 14,061
- 2 Series Coupe (228i, 228i xDrive), 2014-2016: 12,742
- 328xi Gran Turismo, 2014-2016: 12,709
- 2 Series Convertible (228i, 228i xDrive), 2015-2016: 6,824
- Z4 sDrive28i, 2012-2016: 6,621
- 3 Series Sportswagon (328i, 328xi), 2014-2016: 5,980
What is wrong
The water pump circulates engine coolant, and it is driven by an electric motor through a connector supplied by Pierburg Pump Technology GmbH of Germany. BMW's filing says the connector's plastic (polybutylene terephthalate, or PBT) suffers severe localized embrittlement over time, and testing found cracks in the connector. A cracked, degraded connector lets moisture enter the pump. Moisture at an electrical connector can cause a short circuit, which can produce a thermal event and, in rare cases, a fire.
BMW estimates the share of vehicles that actually carry the defect at less than 0.1 percent. As of Oct 28, 2026, when BMW decided the recall, the company was aware of about 10 field instances in the US that relate or may relate to the issue. BMW reports no accidents or injuries connected with it.
Why this is the second recall for the same pump
The August 2024 recall, 24V608, treated the connector as a victim of fluid from elsewhere in the engine bay. Its remedy installed a protective shield to divert residual fluid from the positive crankcase ventilation system's air intake hose away from the connector, with an inspection of the connector and wiring plug, and replacement of the pump or harness if needed.
The new filing tells a different story. In April 2025, a 5 Series in a non-US market suffered a thermal overload at the pump connector after it had already received the 2024 remedy. In June 2025, a US market 3 Series was found smoldering at the same connector, also after the remedy. Lab work first pointed at improper repairs, but a wider review in early 2026 found more post-remedy overheating cases, and material testing through 2026 found the connector plastic itself embrittling and cracking. In other words, the shield guarded the connector from fluid dripping onto it, but the connector was also failing from the inside. BMW decided the new voluntary recall on Oct 28, 2026, stating the root cause was not yet fully determined.
That history is why a completed 24V608 repair does not clear a car from 26V733. If your BMW was fixed under the 2024 recall, it is recalled again.
Park outside: what the advisory means
Until the remedy is completed, owners are advised to park their vehicles outside and away from structures. In plain terms: not in a garage, not under a carport attached to the house, and not tight against a building or another vehicle where a fire could spread. The fire risk described in the filing is a short circuit at a connector, which does not need the engine running to matter, so where the car sits while parked is the one risk owners can control today.
This is a park outside advisory, not a do-not-drive order. The filing does not tell owners to stop driving the cars. It tells them where to leave the cars while the fix does not exist. Fire-risk recalls are the ones where parking location matters most: the Ford Bronco engine fire risk recall covered on this site carries the same lesson in a different form, a wiring harness that can chafe, short and start a fire.
The fix is not ready yet
The remedy is under development, and BMW has not announced what it will involve or when it will be ready. When it is ready, it will be performed free of charge at an authorized BMW center, and owners will get a second notification. Owners who already paid out of pocket for this remedy may be eligible for reimbursement under BMW's general reimbursement plan, so keep receipts.
Dealers were notified on Nov 4, 2026, the day the recall was filed. That means a BMW center, or BMW customer service at 1-800-525-7417, can confirm from its own system whether a specific VIN is in the campaign now, ahead of the public NHTSA lookup date.
When owners will hear from BMW
Owner notification letters are planned for Dec 25, 2026, and VINs become searchable on NHTSA.gov the same day. That is about five weeks after this article, which is the pattern this site keeps seeing: the filing is public and the risk is known long before the letter reaches the mailbox. Our step-by-step guide walks through the check itself: How to Check a Car for Open Recalls by VIN.
What owners should do
1. Park outside and away from structures until the remedy is completed, starting now if your BMW matches the model list above.
2. Do not rely on the 2024 repair. A completed 24V608 remedy does not remove your car from this recall.
3. Confirm your VIN early. Call BMW customer service at 1-800-525-7417 or a BMW center, since dealers have had the campaign since Nov 4, or wait for the NHTSA lookup on Dec 25, 2026.
4. Watch for two letters: the Dec 25 notice, and a second one when the remedy is ready. Keep both with the car's paperwork.
5. Used buyers: any 2012-2018 BMW on the list above deserves a VIN check and a written answer on both recalls, 24V608 and 26V733, before you sign. Our Winter Car Buying Checklist shows where the VIN check sits in a full pre-purchase inspection.
Sources & Citations
Primary public references used for U.S. vehicle research on AutoTechSpot: